Shandong Jeno Steel Group Co., Ltd.
ASTM A514 high strength steel plate
Classification :
Keywords: Handheld refractometer
PRODUCT DETAILS
Product introduction
ASTM A514 Alloy Steel Plate
The A514 plate steels are a group of quenched and tempered alloys with many attractive advantages and characteristics. It has a minimum tensile strength of 100 ksi (689 MPa) and at least 110 ksi (758 MPa) ultimate. Plates from 2.5 inches to 6.0 inches have a specified tensile strength of 90 ksi (621 MPa) and 100 - 130 ksi (689 - 896 MPa) ultimate. A514 plate also provides good weldability, and toughness at low atmospheric temperatures. The ASTM A514 group is designed for a wide range of structural uses as well as machinery and equipment. However, the primary use is as a structural steel in building construction. This group of steel, which also includes A517, alloy steel combine optimum strength, toughness, corrosion resistance, impact-abrasion resistance, and long-term economy.
A514 steel plate
ASTM A514 is most commonly used as structural steel in cranes and large heavy-load machines.
Overview:
Commonly used as structural steel in cranes or large heavy-load machines, A514 offers high strength with weldable, machinable properties.
Also referred to as T-1 steel.
Quenched and tempered for increased strength.
Available in eight grades: B, S, H, Q, E, F, A and P.
Available in heavy plate thicknesses (3-inches or greater).
Suitable in lower temperatures. Charpy impact test results for specific climates available.
Available Sizes
stocks the following standard sizes, but other sizes may be available for special orders.
| GRADE | THICKNESS | WIDTH | LENGTH |
| GRADE B | 3/16" – 1 1/4" | 48" – 120" | UP TO 480" |
| GRADE S | 3/16" – 2 1/2" | 48" – 120" | UP TO 480" |
| GRADE H | 3/16" – 2" | 48" – 120" | UP TO 480" |
| GRADE Q | 3/16" – 8" | 48" – 120" | UP TO 480" |
| GRADE E | 3/16" – 6" | 48" – 120" | UP TO 480" |
| GRADE F | 3/16" – 2 1/2" | 48" – 120" | UP TO 480" |
| GRADE A | INQUIRE | INQUIRE | INQUIRE |
| GRADE P | INQUIRE | INQUIRE | INQUIRE |
MATERIAL PROPERTIES
The following material properties are ASTM specifications and will be confirmed on the Mill Test Report.
| GRADE | YIELD POINT (KSI) | TENSILE STRENGTH (KSI) | MIN. 8” ELONGATION % |
| 3/4" OR LESS THICKNESS | 100 | 110-130 | 18 |
| GREATER THAN 3/4" TO 2.5" THICKNESS | 100 | 110-130 | 18 |
| GREATER THAN 2.5" TO 6" THICKNESS | 90 | 100-130 | 16 |
Technical data
CHEMICAL COMPOSITION
The following composition properties are ASTM specifications for A514 steel grades.
| Grade B | |
| CARBON | 0.12-0.21% |
| MANGANESE | 0.70-1.00% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.20-0.35% |
| CHROMIUM | 0.40-0.65% |
| MOLYBDENUM | 0.15-0.25% |
| VANADIUM | 0.03-0.08% |
| TITANIUM | 0.01-0.10% |
| BORON | 0.0005-0.005% |
| Grade S | |
| CARBON | 0.11-0.21% |
| MANGANESE | 1.10-1.50% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.020% |
| SILICON | 0.15-0.45% |
| MOLYBDENUM | 0.10-0.60% |
| VANADIUM | 0.06% |
| BORON | 0.001-0.005% |
| COLUMBIUM MAX | 0.06% |
| Grade H | |
| CARBON | 0.12-0.21% |
| MANGANESE | 0.95-1.30% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.20-0.35% |
| NICKEL | 0.30-0.70% |
| CHROMIUM | 0.40-0.65% |
| MOLYBDENUM | 0.20-0.30% |
| VANADIUM | 0.03-0.08% |
| BORON | 0.0005-0.005% |
| Grade Q | |
| CARBON | 0.14-0.21% |
| MANGANESE | 0.95-1.30% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.15-0.35% |
| NICKEL | 1.20-1.50% |
| CHROMIUM | 1.00-1.50% |
| MOLYBDENUM | 0.40-0.60% |
| VANADIUM | 0.03-0.08% |
| Grade E | |
| CARBON | 0.12-0.20% |
| MANGANESE | 0.40-0.70% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.20-0.40% |
| CHROMIUM | 1.40-20% |
| MOLYBDENUM | 0.40-0.60% |
| TITANIUM | 0.01-0.10% |
| BORON | 0.001-0.005% |
| CARBON | 0.10-0.20% |
| MANGANESE | 0.60-1.00% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.15-0.35% |
| NICKEL | 0.70-1.00% |
| CHROMIUM | 0.40-0.65% |
| MOLYBDENUM | 0.40-0.60% |
| VANADIUM | 0.03-0.08% |
| COPPER | 0.15-0.50% |
| BORON | 0.0005-0.006% |
| Grade A | |
| CARBON | 0.15-0.21% |
| MANGANESE | 0.80-1.10% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.40-0.80% |
| CHROMIUM | 0.50-0.80% |
| MOLYBDENUM | 0.18-0.28% |
| ZIRCONIUM | 0.05-0.15% |
| BORON | 0.0025% MAX |
| Grade P | |
| CARBON | 0.12-0.21% |
| MANGANESE | 0.95-1.30% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.20-0.35% |
| NICKLE | 1.20-1.50% |
| CHROMIUM | 0.85-1.20% |
| MOLYBDENUM | 0.45-0.60% |
| BORON | 0.001-0.005% MAX |
Warehouse storage
Shandong Jienuo Metal Products Co., Ltd. has a registered capital of 250 million yuan, more than 635 employees, 100 million yuan of property/plant equipment, covering an area of more than 300 acres, and has passed the international quality management system, energy management system, occupational health and safety management system and other standards. The company has advanced production equipment, superb technical force, excellent management and technical personnel, and strong financial strength to provide a strong guarantee for the production of high-quality, sophisticated and cutting-edge products.
Packing and delivery
The company has ISO9001 certification, EU CE10219 system certification, and Swiss SGS quality standard certification. In the future, the company will be a comprehensive modern enterprise featuring international trade and modern logistics as its development direction. Work together to make unremitting efforts for the green future of the steel industry in China and the world.
Application field
Widely used in prefabricated steel structure buildings, glass curtain wall engineering, steel structure engineering, large venues, airport construction, highways, roads, decorative guardrails, tower crane manufacturing, photovoltaic projects, greenhouse agricultural shanty buildings, bridge manufacturing, ships, automobile manufacturing, machinery In many fields such as manufacturing, it has been well received in major construction projects.
Cooperation transaction
Customer Visit Feedback
At the same time, we also look forward to sincere cooperation with customers and friends from all over the world, mutual benefit and win-win results, and common development, and create brilliant!
CERTIFICATE OF HONOR
COOPERATIVE PARTNER
RELATED PRODUCTS
GET A FREE QUOTE