Shandong Jeno Steel Group Co., Ltd.
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
6061 is a common duralumin with good machinability and moderate strength.
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
If there is a certain amount of manganese and chromium, the bad effect of iron can be neutralized.
VIEW MORE +
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
If there is a certain amount of manganese and chromium, the bad effect of iron can be neutralized.
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
VIEW MORE +
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
The alloy also has good mechanical properties and anode reaction.
Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
VIEW MORE +
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
The alloy also has good mechanical properties and anode reaction.
Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
2024 aluminum plate is a typical duralumin in al-cop-magnesium system with reasonable composition and good comprehensive properties.
The alloy is produced in many countries and is the most widely used duralumin.
The characteristics of the alloy are: high strength, a certain degree of heat resistance, can be used for working parts below 150℃.
The strength of 2024 alloy is higher than that of 7075 alloy at temperatures above 125℃.
VIEW MORE +
The alloy is produced in many countries and is the most widely used duralumin.
The characteristics of the alloy are: high strength, a certain degree of heat resistance, can be used for working parts below 150℃.
The strength of 2024 alloy is higher than that of 7075 alloy at temperatures above 125℃.
5083 belongs to Al-Mg-Si alloy, which is widely used, especially in the construction industry.
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
5083 aluminum is one of the most widely used antirust
VIEW MORE +
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
5083 aluminum is one of the most widely used antirust
1060 aluminum plate is widely used in products with low strength requirements.
Products are often used in signs billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
VIEW MORE +
Products are often used in signs billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.