Shandong Jeno Steel Group Co., Ltd.
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
S500QL under EN 10025-6 owned the minimum yield strength at 500 Mpa and tensile strength within 590-770 Mpa. S500QL steel plate,Titanium microalloying is an element of strengthening complex with carbon and nitrogen. S500QL steel plates are mainly chose by end users to manufacture the machiney equipments,such as drilling machine,excavator,grab,conweigh belt and so on
VIEW MORE +
The corrosion resistance, and high temperature strength of 316
stainless steel have been greatly improved due to the addition of Mo element.
The high temperature resistance can reach 1200-1300 degrees and can be used under harsh conditions.
VIEW MORE +
stainless steel have been greatly improved due to the addition of Mo element.
The high temperature resistance can reach 1200-1300 degrees and can be used under harsh conditions.
316 316L Stainless Steel Sheet
Alloys 316 (UNS S31600) and 316L (UNS S31603) are molybdenum-bearing austenitic stainless steels, which are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Alloy 304. These alloys also offer higher creep, stress-to-rupture, and tensile strength at elevated temperatures. In addition to excellent corrosion resistance and strength properties, the Alloys 316 and 316L Cr-Ni-Mo alloys also provide excellent fabricability and formability which are typical of the austenitic stainless steels.
VIEW MORE +
S235J0 is a low carbon, high tensile strength structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, it possesses good cold-forming properties. The plate is produced by fully killed steel process and supplied in normalized or controlled rolling condition.
VIEW MORE +
Grade 304 stainless steel is generally regarded as the most common austenitic stainless steel.
It contains high nickel content that is typically between 8 and 10.5 percent by weight and a high
amount of chromium at approximately 18 to 20 percent by weight. Other major alloying elements
include manganese, silicon, and carbon.
The remainder of the chemical composition is primarily iron.
VIEW MORE +
It contains high nickel content that is typically between 8 and 10.5 percent by weight and a high
amount of chromium at approximately 18 to 20 percent by weight. Other major alloying elements
include manganese, silicon, and carbon.
The remainder of the chemical composition is primarily iron.
Carbon steel coil is made from slabs (mainly continuous cast slabs),
which are heated and then made into strips by roughing and finishing mills.
The hot steel strip from the last finishing mill is cooled to the set temperature
by laminar flow and rolled into coils by a coiler. The cooling coils are processed
into steel sheets, flat coils, and slit strip products through different finishing lines
according to the different needs of customers.
VIEW MORE +
which are heated and then made into strips by roughing and finishing mills.
The hot steel strip from the last finishing mill is cooled to the set temperature
by laminar flow and rolled into coils by a coiler. The cooling coils are processed
into steel sheets, flat coils, and slit strip products through different finishing lines
according to the different needs of customers.